m/2014/06/02/and-this-wont-hel p-the-gas-consumption-either- qeg-update-from-fix-the-world/ #more-27856
THE BREAKTHROUGH OF RESONANCE EXPLAINED: RAW POWER!
In the QEG, resonance is created by modulating the inductance in the core’s primary (or secondary) windings with the spinning rotor. This induces a voltage in the coils which then starts a massive electromechanical resonance, which then builds up even more high voltage through the piezoelectric effect of the mechanical resonance (vibration). This voltage can be as high as 25,000 volts (25kV), with the frequency determined by the tank capacitor value.
The generator performance is then optimized to a first tuning level, where the basic power output is maximized. This is the raw power available, and we have seen as much as 20,000 VARs. This is known as Volt-Amperes Reactive, analogous to Watts but used when rating reactive AC power.
The raw, reactive power must now be converted to RMS power, at 50 or 60 Hz, for the generator to run itself (self-looping) and provide power in the form useable to power your home. There is also a second level of tuning using the exciter coil, grounds, and antenna. For this step, the exciter coil is tuned to 1.3MHz, and used as a form of receiver, to bring additional energy into the QEG core from the energy that is freely available in earth’s atmosphere. Tesla would prefer to call this an accumulation of power rather than a generation of power, as the machine is accumulating energy that is already in the air around us.
The victory of resonance has already been achieved in several QEG’s around the world in the last two months since opensourcing the technology. This is demonstrated in the links below.